kickstop_door_p3klbbb

London Bar Door Frame Reinforcer

 

 

 

 

Before ordering the Kickstop London Bar

 

Check the Staple Size - Width of Bar - Length of Bar

  • The London Bar is a door frame reinforcer and is designed to strengthen and reinforce a timber door frame
  • The London Bar is designed to fit over the rim lock staple (keep) of many different brands, shapes and sizes of rim lock
  • The London Bar staples will fit over most rim lock staples that are the same size (or smaller) than the London Bar staple
  • Choose the correct London Bar staple size to fit over your fitted rim lock staple - Standard, Large, Extra Large or Ingersoll
  • The 'Universal' staple is available to fit over both a standard or large size rim lock staple
  • Check the available width of door frame and then choose the appropriate width of London Bar - 16 mm or 20mm
  • The available width of door frame may be minimal due to fitted architrave - if necessary, the architrave could be reduced in width
  • Choose the length of London Bar required - 24" (610mm), 72" (1830mm) or 78" (1980mm)
  • The two longer London Bars have the staple position at about two thirds of the overall length
  • The top or bottom of the London Bar can be cut to fit - with a hacksaw
  • The short (24" - 610mm) London Bar has the staple positioned in the middle of the bar
  • Choose the colour required, 78" (white or dark brown - 72" (white) - 24" (white, Dark brown or brasslux)

 

Code 2009: (Kickstop Universal London Bar)

The 'Universal' 30mm x 97mm large staple size can easily be 'altered' and 'reduced' to the 30mm x 70mm standard staple size - by using the two extra fixings

Code 9606: (Kickstop Standard London Bar)

Standard 30mm x 70mm staple

 

Universal Staple 

(The internal measurements of the 'D' shape staple are 30mm x 97mm)

Large size staple that can easily be 'altered' to fit over a standard size staple of 30mm x 70mm by using the two supplied fixings to 'reduce' the size to 70mm - as shown

Standard Staple

(The internal measurements of the 'D' shape staple are 30mm x 70mm)

To fit over the staple of smaller nightlatches

Large Staple

(The internal measurements of the 'D' shape staple are 30mm x 97mm)

To fit over the staple of large rim locks

Extra Large Staple

(The internal measurements of the 'D' shape staple are 40mm x 105mm)

To fit over the staple of larger rim locks

 

      

 9612 & 9613 Ingersoll Staple - This is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.

It has a small cut out section on the staple to allow the Springbolt of the lock to pass through.

The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.

NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side

 Ingersoll SC71 Nightlatch

This is the Ingersoll SC71 Nightlatch - for illustration purposes only

 

Tel: 01536 790999

 

Online B2B shop powered by Security Matters

Kickstop London Bar Universal Staple (Short/ Narrow)

  • Code: 2011 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

More details
Product Code: 2011 WH
Add to cart

Kickstop London Bar Universal Staple (Medium/ Narrow)

  • Code: 2009 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a London Bar with a Standard or Large size staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

More details
Product Code: 2009 WH
Add to cart

Kickstop WIDE London Bar Universal Staple (Short/ Wide)

  • Code: 2017 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • White Colour
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

More details
Product Code: 2017 WH
Add to cart

Kickstop WIDE London Bar Universal Staple (Medium/ Wide)

  • Code: 2010 WH
  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less **
  • 72" (1830mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

** The 2 extra fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large Staple

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Medium/ Narrow)

  • Code: 2606 WH
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

More details
Product Code: 2606 WH
Add to cart

Kickstop London Bar Standard Staple (Long/ Narrow)

  • Code: 9606
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Standard Staple (Short/ Narrow)

  • Code: 9608
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop WIDE London Bar Standard Staple (Long/ Wide)

  • Code: 9607
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop WIDE London Bar Standard Staple (Short/ Wide)

  • Code: 9616
  • Standard size 'D' shape staple to fit over a lock staple/keep which is 30mm x 70mm - or less
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Medium/ Narrow)

  • Code: 2609 WH
  • Large size 'D' shape staple to fit over a lock staple/keep which is 30mm x 97mm - or less
  • White Colour
  • 72" (1830mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

More details
Product Code: 2609 WH
Add to cart

Kickstop London Bar Large Staple (Long/ Narrow)

  • Code: 9609
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 78" (1980mm)  x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Large Staple (Short/ Narrow)

  • Code: 9611
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 24" (610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop WIDE London Bar Large Staple (Long/ Wide)

  • Code: 9610
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop WIDE London Bar Large Staple (Short/ Wide)

  • Code: 9617
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • 24" (610mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Extra Large Staple (Long/ Narrow)

  • Code: 9630
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 78"(1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Extra Large Staple (Short/ Narrow)

  • Code: 9632
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 24"(610mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame

Kickstop WIDE London Bar Extra Large Staple (Long/ Wide)

  • Code: 9631
  • Extra Large size 'D' shape staple to fit over lock staple/keep which is 40mm x 105mm - or less
  • 78" (1980mm) x 3/4" (20mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Left Hand (Long/ Narrow)

  • Code: 9612
  • Ingersoll SC71 size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less **
  • This is a Standard Size staple with a cut out to allow the Springbolt of the lock to pass through
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

The staple is a modified Standard Staple size with a small cut out section that allows it to be used with the INGERSOLL SC71 Size - *LEFT HANDED

NB: *The lock would be fitted to *right hand side of door when viewed from inside - If in doubt - check before ordering

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw

Kickstop London Bar Right Hand (Long/ Narrow)

  • Code: 9613
  • Ingersoll SC71 size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less **
  • This is a Standard Size staple with a cut out to allow the Springbolt of the lock to pass through
  • 78" (1980mm) x 5/8" (16mm) solid steel bar - with rounded sides and countersunk screw holes
  • To Reinforce and Strengthen Wooden Door Frame 

The staple is a modified Standard Staple size with a small cut out section that allows it to be used with the INGERSOLL SC71 Size - *RIGHT HANDED

NB: *The lock would be fitted to *left hand side of door when viewed from inside - If in doubt - check before ordering

Depending on the vertical position (height) of the rim lock staple/keep on the door frame, it may be necessary for the purchaser to cut the top or bottom off the longer versions of the London Bars - with a hacksaw